SONNAX VACUUM TEST STAND

SONNAX VACUUM TEST STAND

Postby transpck08 » Thu May 19, 2016 6:59 pm

Who else has purchased one of these?? Its a game changer. No more guessing on where the problem could be.
transpck08
 
Posts: 154
Joined: Tue Sep 08, 2015 1:16 pm

Re: SONNAX VACUUM TEST STAND

Postby dhritsko » Fri May 20, 2016 8:56 am

I was on the fence until I went to a couple Roadshows ( if anyone has a chance to see on PLEASE do so ) and it really opened my eyes . TS will be bringing in the Robinair pump T-15300. Eliminates guess work like you said and the uses are endless .
Dave Hritsko
Transtar Industries
Technical Service Manager
User avatar
dhritsko
 
Posts: 1023
Joined: Mon Oct 28, 2013 3:43 pm
Location: Walton Hills , OH

Re: SONNAX VACUUM TEST STAND

Postby tschafers » Fri May 20, 2016 9:34 am

I bought one but did not use it as much as I should have until I watched the demonstration a couple years ago at the convention. Now I use it regularly and the more you use it the easier and quicker it is. The "Vacuum Test Guides" provided by Sonnax have been a big plus is its ease of use. The only drawback, if you can call it one, is that you have to clean and assemble the VB dry, vacuum test it, and them disassemble it to ream the bores, then re-clean and reassemble. But the time spent is saved in less headaches.
User avatar
tschafers
 
Posts: 29
Joined: Thu Oct 31, 2013 3:16 pm

Re: SONNAX VACUUM TEST STAND

Postby dhritsko » Fri May 20, 2016 9:41 am

The last roadshow I went to Randall was checking checkball capsules , holy smokes do they leak . You can check Honda shaft bushings and now solenoids . Sonnax has some manifolds to check ZF solenoids .
Dave Hritsko
Transtar Industries
Technical Service Manager
User avatar
dhritsko
 
Posts: 1023
Joined: Mon Oct 28, 2013 3:43 pm
Location: Walton Hills , OH

Re: SONNAX VACUUM TEST STAND

Postby transpck08 » Fri May 20, 2016 4:03 pm

A way better method of checking honda shaft bushing wear than the old method that i would use which would be with a piece of scotch office tape like ATRA has on the rebuild procedure book.
transpck08
 
Posts: 154
Joined: Tue Sep 08, 2015 1:16 pm

Re: SONNAX VACUUM TEST STAND

Postby carod » Sun Oct 09, 2016 12:02 am

What is the cost of one of these Sonnax Vacuum Test Stands
carod
 
Posts: 75
Joined: Wed Aug 10, 2016 6:53 pm
Location: Calgary, Alberta

Re: SONNAX VACUUM TEST STAND

Postby dhritsko » Mon Oct 10, 2016 10:21 am

check with your sales rep on the test stand price , remember you also have to buy a vacuum pump . It will be a great investment .
Dave Hritsko
Transtar Industries
Technical Service Manager
User avatar
dhritsko
 
Posts: 1023
Joined: Mon Oct 28, 2013 3:43 pm
Location: Walton Hills , OH

Re: SONNAX VACUUM TEST STAND

Postby jasper1234 » Wed Dec 14, 2016 10:18 pm

i have on and love it i commented on another post about the zf6 solenoid manifold set it is unbelievable how bad these solenoids leak.sean
jasper1234
 
Posts: 7
Joined: Tue Dec 06, 2016 3:17 pm


Return to Tools & Supplies

Who is online

Users browsing this forum: No registered users and 1 guest